Well… I’ve got a 150$ paperweight unless I can fix the usb end. Somehow it got water on it and rusted either from prior owner or an unknown cause. Anyway it was working yesterday and finally broke.
I’m not super experienced in this sort of work but I’ve got 5 wires. I can get a repair usb end but I don’t know what wires are carrying what.
Any ideas? The company doesn’t have any replacement parts available so I can’t just replace the cord.
USB damage
Re: USB damage
You should be able to find wiring diagrams on-line.
Saw this:
What are the 5 colored wires in a USB cable?
A Brief Introduction to USB Color Code (USB Wire & Port)
The meanings of these USB wire color code are:
Red: The wire in red is used to pass positively-charged electric power. It has 5V direct current electricity.
Black: The wire in black is the ground wire.
White: The wire in white is used for positive data (D+).
Green: The wire in green is used for negative data (D-).
I think that the 5th wire is the ground to the metal outside of the plug, and this would be the woven wire loom that surrounds the other 4. (At least some cables are made like that.)
On many devices, the challenge will be to manage to solder the wires into the device, because those points are very close together, especially if it's the USB-C type connector.
But maybe I'm not understanding the question adequately.
Saw this:
What are the 5 colored wires in a USB cable?
A Brief Introduction to USB Color Code (USB Wire & Port)
The meanings of these USB wire color code are:
Red: The wire in red is used to pass positively-charged electric power. It has 5V direct current electricity.
Black: The wire in black is the ground wire.
White: The wire in white is used for positive data (D+).
Green: The wire in green is used for negative data (D-).
I think that the 5th wire is the ground to the metal outside of the plug, and this would be the woven wire loom that surrounds the other 4. (At least some cables are made like that.)
On many devices, the challenge will be to manage to solder the wires into the device, because those points are very close together, especially if it's the USB-C type connector.
But maybe I'm not understanding the question adequately.
0 x
-
- Posts: 18410
- Joined: Thu Jun 13, 2019 12:02 am
- Location: Washington State
- Affiliation: former MCUSA
Re: USB damage
Can you replace the whole cord at the other end?Soloist wrote: ↑Sun Jun 18, 2023 9:45 pm Well… I’ve got a 150$ paperweight unless I can fix the usb end. Somehow it got water on it and rusted either from prior owner or an unknown cause. Anyway it was working yesterday and finally broke.
I’m not super experienced in this sort of work but I’ve got 5 wires. I can get a repair usb end but I don’t know what wires are carrying what.
Any ideas? The company doesn’t have any replacement parts available so I can’t just replace the cord.
How non-standard can a USB cord be?
0 x
A fool can throw out more questions than a wise man can answer. -RZehr
Re: USB damage
That would be the easiest option if I can find one, I also need to figure out how to open it without damaging it.
0 x
Re: USB damage
I think that color scheme was what I was looking for. I think I just need to either find a cord option (I’m a little skeptical) or a new plug with either lead wires or a way to solder it.Neto wrote: ↑Sun Jun 18, 2023 10:17 pm You should be able to find wiring diagrams on-line.
Saw this:
What are the 5 colored wires in a USB cable?
A Brief Introduction to USB Color Code (USB Wire & Port)
The meanings of these USB wire color code are:
Red: The wire in red is used to pass positively-charged electric power. It has 5V direct current electricity.
Black: The wire in black is the ground wire.
White: The wire in white is used for positive data (D+).
Green: The wire in green is used for negative data (D-).
I think that the 5th wire is the ground to the metal outside of the plug, and this would be the woven wire loom that surrounds the other 4. (At least some cables are made like that.)
On many devices, the challenge will be to manage to solder the wires into the device, because those points are very close together, especially if it's the USB-C type connector.
But maybe I'm not understanding the question adequately.
0 x
Re: USB damage
A new plug with lead ends should be easy to find. Just buy a USB extension cord and use a pair of dikes to cut it in half.Soloist wrote: ↑Sun Jun 18, 2023 10:33 pmI think that color scheme was what I was looking for. I think I just need to either find a cord option (I’m a little skeptical) or a new plug with either lead wires or a way to solder it.Neto wrote: ↑Sun Jun 18, 2023 10:17 pm You should be able to find wiring diagrams on-line.
Saw this:
What are the 5 colored wires in a USB cable?
A Brief Introduction to USB Color Code (USB Wire & Port)
The meanings of these USB wire color code are:
Red: The wire in red is used to pass positively-charged electric power. It has 5V direct current electricity.
Black: The wire in black is the ground wire.
White: The wire in white is used for positive data (D+).
Green: The wire in green is used for negative data (D-).
I think that the 5th wire is the ground to the metal outside of the plug, and this would be the woven wire loom that surrounds the other 4. (At least some cables are made like that.)
On many devices, the challenge will be to manage to solder the wires into the device, because those points are very close together, especially if it's the USB-C type connector.
But maybe I'm not understanding the question adequately.
0 x